• (for help, see instructions for adjusting and cleaning the Magic/Royal grinder for illustrations, on this web site). 4- Remove two Torx screws located on the rear edge, under the water tank.

Olympia Express Maximatic Espresso Machine & Moca Grinder Video; Commercial Leasing from Cerini Coffee; The Repair Shack has been acquired by Cerini Coffee.

• removed, a water source has to be connected and the water level sensor activated (cheated) with a magnet placed next to the location of the level sensor. To connect the machine with source of water: 1- take the 24' long plastic or silicone tube. 2- disconnect the hose from the water inlet (from under side of the top cover).

• If the machine is not heating, check the following: a- the thermos tat (mo unted on the heat exchan ger and steam boiler if present b- the heating element (on the lower side, not seen in picture). C- the thermof d- the electronic sensor that initially brings water to temperature for espresso.

• 1- Disconnect the 90 degree plastic water inlet connector from the rear of the pump. 2- Slide the rear mounting pad off of the water inlet of the pump. 3- With the rear end of the pump free, hold the front brass nozzle of the pump with pliers and unscrew the front pressure release valve. List a4 v kletku s ramkoj.